05.02.2012 / 19:59


Heating and Steam Systems



Diagram of hot water boiler less than 100 kW


Water treatment for warm water boilers with a supply temperature up to 100 °C, boiler output below 100 kW

Wasseraufbereitung für Warmwasserkessel mit einer Vorlauftemperatur bis 100 °C, Kesselleistung unter 100 kW
» Diagram of hot water boiler less than 100 kW (PDF, German, 286 KB)

Treatment of the circulating water below 100 kW:

JUDO HEIFi-KOM flushable return heating filter with ventilation system and automatic filling station

JUDO Thermodos dosing pump system for the addition of Thermodos dosing solutions












JUDO HEIFi-KOM: the power-pack for the heating system

» Filtering
» Ventilation
» Fixed connection to drinking water system with pipe separators and pressure reducers
» Automatic filling and refilling
= Prevention, reliability, time- and cost savings

HEIFi-KOM is the high-performance combination of the HEIFi-TOP flushable return filter with the automatic HEIFi-Fül filling station.

Sludge and corrosion, together with air and gas bubbles, lead to problems and loss of performance in heating systems. The HEIFi-TOP flushable return filter with sludge and micro-bubble trap system provides the answer to these problems, trapping even the finest particles of less than 10 µm.
During flushing – without pressure loss – the circular brush is cleaned and the sludge flushed out. The quick-ventilation device automatically removes the air from the system. The HEIFi-Fül filling station is permanently connected to the drinking water system, and serves for the automatic filling and refilling of the heating system in accordance with DIN/EN 1717.
Water from the heating system cannot flow back into the drinking water system. The built-in pressure-reducer ensures the required working pressure in the heating system at all times. With JUDO HEIFi-KOM, the installer can conveniently fill and connect the heating system without further assistance, all in a few simple operations.


JUDO product Dosing Analysis Effect
JTH-L dosing solution

in the heating return circuit

Measurement kit for molybdenum
(JTH-ML)

Corrosion inhibition Protective
film creation

JTH-R* dosing solution

in the heating return circuit


Cleaning of heating circuits














* Application period approx. 4 weeks, then flush, refill and condition with Thermodos-L


 


Imprint: © JUDO Water Treatment GmbH 2007
All rights reserved. Data Protection.
Webmaster: Timo Weisshaar
powered by JUDO - Version 6.2.6.0

JUDO contacts
Just give us a call, we are always here for you!
This page shows you pictures of your JUDO contacts.
Please give us a call or send us an e-mail – we will offer you an optimum solution both from a technical and economic point of view...
Go...
JUDO Information Events
Profit from a decisive information head start - now!
We offer free daytime and evening seminars on our water treatment and wellness systems.
Go...
JUDO Quotations
Would you like a non-binding quotation on a solution for your specific problem?

Please use the following questionnaire, and fill it out completely. We also require a current water analysis from you, or you can send us a water sample taken on site.